News
Current Position： Home
> News
What is the important role of gas mold temperature machine
announcer：
As far as the gas mold temperature machine is concerned, we will actually notice that it can actually eliminate the melted wires on the surface of the product as well as its weld marks, ripples and silver wire patterns. In this respect, the gas mold temperature In fact, the machine has completely solved a series of shrinkage phenomena on the surface of plastic products to a certain extent.
The gas mold temperature machine is equipped with heating and its cooling and heating and cooling conversion control functions. In addition, its high temperature hot water and its cooling water recovery system and energy saving effect will actually be more obvious. As far as its products are concerned, we actually have to pay attention to what it says, in fact, it does not need to carry out subsequent processing of painting. In this regard, in fact, it can increase the finished product rate by 20-30%.
There is a true color LCD display (optional) on the gas mold temperature controller. Furthermore, we actually notice that it actually has touch mode Chinese numeric input. The next thing is actually a full Chinese interface. Because of this, its operation is actually very simple.
In fact, the gas mold temperature machine will directly use European and American imported components. It can actually detect the temperature of its single and double circuit molds (optional). For the input and output pipes, it is actually possible. To a certain extent, it is actually possible to directly use 316 stainless steel tubes. The next thing is that it can be used for multiple sets of input and output. The interface is correct.
The gas mold temperature controller does not need to be connected to the boiler and other external temperature control auxiliary equipment. In this regard, it can actually omit a more complicated boiler equipment (high-pressure equipment is safe and environmentally friendly) to a certain extent. Approval) and pipeline engineering. For the full closed-loop system on the gas mold temperature machine, in fact, it can control the detection of the input and output temperature, and use the actual mold temperature to feed back the PLC.